Thermoguard Fire Varnish 20sq.mtr (clear intumescent for wood), Thermoguard

Thermoguard Clear Intumescent Fire Varnish basecoat. 20 square meters.

DESCRIPTION AND USE
Thermoguard Fire Varnish is an exceptionally clear lacquer for decorative fire protection of prepared timber and timber derivative surfaces. Its special formula provides a hard, durable finish suitable for panelling, boarding, doors, floors, furniture etc. It's clear finish enhances the natural beauty and fire protects new and previously varnished internal timber surfaces.

Application

Mix the base and activator components in ratio 2:1. Stir base and add activator slowly; continue stirring vigorously until a homogeneous mix is obtained.Usable pot life 1 ½ - 2 hours.
Brush, roller or spray. Apply 1 or 2 coats of Thermoguard Fire Varnish. After 12 hours (min.) apply 1 coat of the appropriate Topcoat. Contact Thermoguard for spray equipment advice. Ensure surfaces are clean and dry. Maximum timber moisture content 18%. Maximum relative humidity during application and drying 8°C. Minimum surface temperature 3°C above dew point.
Clean equipment with water immediately before and after use. Ensure adequate ventilation during drying.

To be used in conjunction with Thermoguard clear fire varnish overcoat. See related products below.