Thermoguard Flame Retardant Asbestos Encapsulating Coat 5kg, Thermoguard

Thermoguard Flame Retardant Asbestos Encapsulating Coat 5kg.

For use on Roofs, garages, sheds, piping areas and bolierooms etc.

Can be tinited in pastel shades if required. Enter colour preference at checkout.

PRODUCT USE
The sealing of rigid asbestos within buildings which is sound, firmly adhering and not subject to mechanical damage, in particular rigid asbestos in locations which are concealed and difficult to access, such as service ducts, roof and ceiling voids.

Also used to seal in difficult-to-remove, firmly bonded asbestos and loose isolated fibres remaining after primary rigid asbestos removal has taken place.

Effectively prevents the release of asbestos and other fibres into the atmosphere by encapsulating them. Permanently bonds residual asbestos fibres, after primary removal, to the surface to which they are attached or upon which they lay.

Helps prevent surface spread of flame on non- combustible surfaces.

Can be used in conjunction with Thermoguard Timbercoat or Wallcoat Intumescent Paints to upgrade combustible surfaces to Class 1 and Class 0.sulating "intumescent" barrier coating and Thermoguard flame retardant paint.

PRODUCT DESCRIPTION
A sealer coating based upon a unique adhesive-grade resin, highly plasticised for outstanding flexibility to withstand normal movement within a building and to the components within a building and incorporating Flame Retardant additives.

Water based, solvent free, low odour, it is safe and easy
to use.

PRODUCT USE
The sealing of rigid asbestos within buildings which is sound, firmly adhering and not subject to mechanical damage, in particular rigid asbestos in locations which are concealed and difficult to access, such as service ducts, roof and ceiling voids.

Also used to seal in difficult-to-remove, firmly bonded asbestos and loose isolated fibres remaining after primary rigid asbestos removal has taken place.

Effectively prevents the release of asbestos and other fibres into the atmosphere by encapsulating them. Permanently bonds residual asbestos fibres, after primary removal, to the surface to which they are attached or upon which they lay.

Helps prevent surface spread of flame on non- combustible surfaces.

Can be used in conjunction with Thermoguard Timbercoat or Wallcoat Intumescent Paints to upgrade combustible surfaces to Class 1 and Class 0.sulating "intumescent" barrier coating and Thermoguard flame retardant paint.

PRODUCT DESCRIPTION
A sealer coating based upon a unique adhesive-grade resin, highly plasticised for outstanding flexibility to withstand normal movement within a building and to the components within a building and incorporating Flame Retardant additives.

Water based, solvent free, low odour, it is safe and easy
to use.